How is EN ISO 20471 Tested?

    High visibility clothing is subjected to numerous tests of both the component materials and final garment to ensure that it will perform when it matters most. Some of the key tests performed are outlined below:   Fabric Strength No matter what fabric a high visibility garment has been made from, it is essential that it is robust enough to withstand the stresses of use. It is for this reason that component fabrics are tested for their burst, tensile or tear strength (dependent on the fabric type).   Colour Fastness Understandably, there is little point in assessing the compliance of high visibility fabric colour if everyday factors such as washing and sunlight subsequently cause the colour to fade. As a result, the colour of the garment is assessed following a series of wash cycles and exposure to a Xenon arc lamp to ensure that appropriate protection will be provided throughout the lifetime of the garment.   Colour Assessment There are three colours defined as suitable for use as high visibility clothing: yellow, orange-red and red. These colours are checked using a spectrophotometer to check that they fall within the dedicated colour co-ordinates and meet with the minimum luminance requirements defined in the standard. Colour assessment takes place on both samples of new fabric and samples of fabric that have undergone washing and Xenon arc exposure.   Dimensional Stability Garments are subjected to a series of wash cycles to assess whether or not they can withstand domestic, industrial or dry cleaning procedures. The manufacturer requests the specific washing instructions, providing they fall within the minimum requirements outlined by the standard. As such, details of suitable washing methods for the particular garment can be found on the product washcare label.   Tape Testing The reflective tape used on high visibility clothing is tested for its light reflective qualities at different distances and angles. A photometer measures the amount of light reflected back to the point of origin by new and pre-treated samples of tape, thus ensuring a minimum level of visibility is maintained.   Garment Assessment The standard dictates various design requirements that must be present within high visibility garments –for example, there are instructions regarding tape placement and spacing which must be adhered to. As a result, a comprehensive garment assessment is performed to confirm whether or not the product is compliant in accordance with the standard. The process also results in final classification of the item –with Class 1 offering the lowest level of conspicuity, and Class 3 providing the highest.   Chemistry Testing As all products will likely come into contact with an individual, materials used within any PPE product must not contain any chemicals that may be harmful to the wearer. As a result, tests are performed to ensure that no prohibited chemicals are present, or that other specified chemicals are present within acceptable limits.   View our range of High Visibility Workwear